DustKiller can be used for controlling dust and fine particles in any closed room.

DustKiller - Dust filtration system, is a high-efficiency, two-stage electrostatic precipitator, designed, developed and manufactured   with suction vom by Powertech Pollution Controls Pvt. Ltd, Bangalore, India, with built-in fan blower used for control of atmospheric dust in closed rooms.

Feature Achieves a high level of dust control, with removal of around 80% of atmospheric dust levels existing in the enclosed area. Captures fine particulates before they settle down on precision equipment. High filter efficiency. Low electrical running cost. No replacement of electrostatic module. High reliability and easy maintainance. Complete factory support from engineering professionals, based on years of expertise in industrial pollution. Usage DustKiller can be used for controlling dust and fine particles in any closed room, preferably but not necessarily fitted with window/split type airconditioners - electronic labs, mechanical precision assembly areas, standards room, metrology labs, pharmaceuticals,bio-tech'labsetc. or wherever dust control is a necessity DustKiller can be quickly installed without major changes in the existing area.

How It Works  Dust and fine particulate matter are sucked in with the air stream by the centrifugal blower (1) through the inlets (2) on top. These enter the prefilters (3) where large particles are removed. The remaining fine particles then enter the electrostatic module(4) where, between a series of parallel aluminium plates, they receive a high +ve charge. These positively charged particles then pass through another series of aluminium plates which are negatively charged. Here, the particles are attracted to the oppositely charged aluminium plates and stick to them just like iron filings are attracted to a magnet, but, with one difference - the particles remain adhered to the plates even when the electrostatic filter is switched off. The air, now devoid of particles, escapes through the outlets (5) as clean air. The postfilters (6) help in even distribution of air flow through the electrostatic module.

Technical Specifications-Dustkiller Dustkiller - Model DK 500 Dustkiller - Model DK 500 Capacity : 500 Cu mtrs / hour 1000 Cu mtrs / hour Input Voltage : 230 V ± 10% 230 V ± 10% Current Drawn : 0.25 A 0.5 A Filters : Pre/After filters: Wire mesh Fine Modules: Electrostatic with aluminium plates & high voltage insulators. Post filter: Activated carbon granules Pre/After filters: Wire mesh Fine Modules: Electrostatic with aluminium plates & high voltage insulators. Post filter: Activated carbon granules Filter effieciency : 90% to 98% for airborne particles. 90% to 98% for airborne particles. Suction Fan : Centrifugal fan,low noise Centrifugal fan,low noise Dimensions : Enclosure 850(H) x 400 (W) x 360 Enclosure 850(H) x 400 (W) x 360 Mounting : Floor mounting ; wall mounting with fixtures Floor mounting ; wall mounting with fixtures    Custom made models available Due to continuous innovations, specifications are subject to change without notice.